| Cartridge Heater Types |
|---|
| High Density Cartridge Heater |
| Product | Cartridge Heater |
|---|---|
| Diameter Φ | 6mm ~ 20mm |
| Material | Stainless Steel |
| Voltage | 220V/440V |
| Power | 40W~4000W |
Quick Connect
Modern Radiant Heating
Plot no 9, Sai-Baba compound, Behind Arihant Complex, Mugat dyeing lane, Besides Kiran Dyeing/Industries, Udhna, Surat, Gujarat, India
Request a quote
Description
With years of experience in manufacturing, We are a renowned High Quality cartridge heater manufacturer in India. We make and we design these heater exclusively for industrial use. Our cartridge heater are of high quality, are safe, and are offered with wide range of customization. Cartridge heater made by us offers precise temperature control for a wide range of industrial process
We manufacture these heater in various Diameter, Length and power density, With ability to choose various clamping option and end terminals. These heaters are made from high resistance steel (Other options are also available, like High nickel steel or incoloy). We use high quality compressed MgO insulation which effectively insulate the live wire and the sheath material and also allowing heat to transfer effectively. These Heater can be made with constant watt density or with varying watt density along its length. Normally these heater can be operated at a maximum of 750°C (1382°F) but some of the variations can even operate at more than 850°C.
Our customer can order these heater from their own place with their own specification and rest assured on us. If you need any help, feel free to contact our team. We would be happy to serve you
Cartridge Heater Available End connections
Square Block End Connection
Flanged Mounted Cartridge Heater with Metal Coundit
Flanged Cartridge Heater
Cartridge Heater with threaded nut metal conduit
Cartridge Heater with threaded nut
Cartridge Heater with Metal-Conduit
Cartridge Heater with square block with metal conduit
Cartridge Heater Straight lead (Mostly used)
Drill Hole/Cartridge Heater Diameter selection Guide
For maximum efficiency and long life, a cartridge heater diameter should be as near to the hole diameter as possible.
But, It is a matter of fact, that when a material temperature increases, it tends to expands
So, if a cartridge heater outer diameter is made equal to the hole dia, in cold condition, then after switching on the heater, the heater would stick to the hole because of thermal expansion.
It would hamper the normal operation of the heater and hence results in lower life.
Also, it might be difficult to remove such heater after their failure, which would have sucked inside the hole.
It is point to be noted that the diameter of the cartridge heater should attain the diameter of the hole at working temperature instead of cold temperature
The above Infographics will guide and help you in selecting a suitable cartridge heater dia (in mm) based on you drilled hole.